Hygger Pinpoint Saltwater Aquarium Heater With Digital Thermostat Ic Temp Controller, Titanium Tube Submersible Fish Tank Heater For Coral Reef 100 Watt

Hygger Pinpoint IC Temp Controller Aquarium Heater will be your best choice!

Specification:
Voltage: 110V-120V, 60HZ
Power cord length: 5.5 ft
Available In:
Length – 8.7′, 5~10 Gallons, 50 Watts
Length – 9.8′, 10~25 Gallons, 100 Watts
Length – 10.7′, 20~45 Gallons, 200 Watts
Length – 12.3′, 60~120 Gallons, 500 Watts

Notice: Please read instruction and cautions of package box carefully before use, and keep it away from children.
☻ This titanium heater is not suitable for use in acrylic fish tank.
☻ DO NOT use heater alone, to avoid overheating, it must be worked with thermostat and temperature detector. Keep heater and thermal detector submerged
☻ Make sure the heater is completely submerged in the water before power on.
☻ Make sure the thermal detector is fully submerged when it’s on duty.
☻ We recommend to install a water pump or wave pump to circulate water movement so that the whole aquarium area at the same temperature.
☻ Make sure heater placed horizontally and fully submerged when it’s on duty .
☻ DO NOT put the aquarium heater into the sand as it will burn the case and casue electric leakage.
☻ As thermostat is not waterproof, please keep it away from aquarium. Stay dry.
☻ If you want to clean the fish tank or take out the heater, please DISCONNECT power and wait for 30 minutes to cool down.
☻ This heater is only suitable for indoor use.
☻ We don’t suggest to use this temperature controller for other brand heater for security reasons.

Package included:
1* Submersible Aquarium Heater
1* Thermostat with Detector
2* Suction Cups
1* User Manual

***Internaitonal customer beware of the local voltage. Any voltage over 120V will burn out the controller and heater without transformer.